ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(5)
Remove retainer clip from the nose pin holding the post to the frame. Push upwards on the post to enable
the nose pin to be removed, then lower the post. This nose pin will be used to connect the anchor
assembly long link to the post [step (7)].
(6)
Remove retainer clip and nose pin securing sliding block in frame. Use this pin to secure block once post
has been tensioned. Until needed this pin is stored in bottom panel of bay 5. Place puller handle in bottom
panel of bay 5.
4-57
