TM 5-5420-226-20-2
WATER SEPARATOR FUEL FILTER OUTLET HOSE ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS:
7/8 in. combination box and open end wrench
9/16 in. combination box and open end wrench
SPECIAL TOOLS: Ground hop kit (Item 30, Chapter 3, Section I)
SUPPLIES:
Rags (Item 12, Appendix D)
Sealing compound (Item 27, Appendix D)
Drain pan
Dry cleaning solvent (Item 55, Appendix D)
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-2)
Drain fuel-water separator (page 7-21, steps 1 thru 6)
REMOVAL:
1. Using 9/16 inch wrench, remove self-locking nut
(A) and hose clamp (B) from hose assembly (C).
2. Using 7/8 inch wrench, remove hose assembly (C)
from bulkhead elbow (D).
Go on to Sheet 2
TA107639
